The Kozi BayWin, as you might suspect, is a bay window style stove. It's more stylish than the model 100 with the corners softened to suit the bay window design. The freestanding stove is mounted on a pedestal and floor protector.The Kozi BayWin produces 40,000 btu. and is capable of heating an area of 1,800 square feet. Maximum burn time is 50 hours for the freestanding stove without the hopper extension, and 40 hours for the insert. The optional hopper extension adds fifty pounds fuel capacity and extends the maximum burn time to 100 hours. See comments below.
Standard equipment with this stove is the glass saver, which reduces cleaning.
The 'MX' controller provides stove diagnostics in the form of blinking led lights to alert the user to any problems.
If you are unsure of the meanings of the terms in the pellet stove review below,or their implications, please go to the Pellet Stove Reviews page for an explanation.
Heating Area 1,800 sq.ft.
Max. Heat Output 40,000 btu.
Min. Heat Output 8,000 btu. Zero with optional thermostat
Automatic Ignition Yes
Manual Ignition If needed
Hopper Capacity Freestanding 50 lbs. Insert 40 lbs.
Burn time Freestanding 50 hrs. Insert 40 hrs.
Fuel Type Premium grade wood pellets. See comments below
Glass Air Wash Yes
Built in Blower Yes
Convection Blower Capacity Undisclosed
Thermostat Compatible Yes
E.P.A. Approved Yes
Emissions 1.83 gr./hr.
Height 31 in.
Width 25 in.
Depth 25 in.
See below for insert dimensions
Weight Freestanding 225 lbs. Insert 200 lbs.
Window Size 20 in. by 8 in.
Flue Vent Size 3 in.
Top Vent No
Rear Vent Yes
Rear Vent Height Freestanding 18 in. Insert 8.5 in.
Exhaust Temperature Sensor Yes
Low Draft Shutdown Yes
Construction Type Fabricated steel
Automatic Shutdown and Re-ignition Yes, with optional thermostat
APR Industries Ltd. honors a five-year limited warranty on all steel fabricated parts and a one-year warranty on all electrical parts. The following items are not covered under warranty:
Glass, Gasket and Seals, Ceramic Bricks, Burn Pot, Paint and Powder Coating, Gold Plating, Inner Heat Shields, Gear Motor, Self Igniter and Glass Saver
Hopper extension. Adds 50 lbs. capacity increasing burn time to 100 hrs. Freestanding stove only.
Pellet loading chute.
Dimensions for Kozi BayWin Fireplace Insert
Height 23 in
Width 25 in.
Depth 11 in. onto hearth 14 in. into fireplace
Min. Fireplace Size
Height 19.5 in
Width 23 in.
Depth 16 in.
Insert Surround Dimensions
39 in. by 29 in.
45 in. by 32 in.
The hopper extension can not be fitted to the Insert.
Unusually, the fan motors on this stove have oiling points and this is part of the regular maintenance schedule.
This stove is sensitive to pellet quality and can not handle pellets with a high ash content.
The air draft for combustion must be adjusted manually.
The auger motor, burn pot and igniter are not covered by the warranty.
Clean the heat exchanger tubes, lift top heat shield and dump ashes into burn chamber, remove and clean the burn pot, empty the ash. Clean the glass and inspect the condition of the door gasket.
Clean the venting system, clean behind the rear heat shield and the exhaust passages in the stove. Clean the combustion fan and housing. Oil the circulation fan motor.
If you would like to leave a review of the Kozi BayWin pellet stove or fireplace insert, please use the form on the contact page.